AKD4626 Datasheet, PDF (8/39 Pages) Asahi Kasei Microsystems – Evaluation board Rev.B for AK4626

ASAHI KASEI
[AKD4626]
AK4626 Control Program operation manual
n Set-up of evaluation board and control software
This evaluation board does not support I²C control.
1. Set up the AKD4626 according to above mentioned setting.
2. Connect IBM-AT compatible PC with AKD4626 by 10-line type flat cable (packed with AKD4626). Take care of the
direction of 10pin header. (Please install the driver in the CD-ROM-disk when this control software is used on
Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3. Insert the CD-ROM-disk labeled “AK4626 Evaluation Kit” into the CD-ROM-disk drive.
4. Access the CD-ROM-disk drive and double-click the icon of “akd4626.exe” to set up the control program.
5. Then please evaluate according to the followings.
Attention: Please use fixed “CAD1-0=01”.
n Explanation of each buttons
1. [Write default] : Initialize the register of AK4626.
2. [Function1] : Dialog to write data by keyboard operation.
3. [Function2] : Dialog to evaluate IPGA and ATTL/ATTR/ATTM.
4. [Write] : Write data to each register.
5. [Close]:
Control Program is closed.
<KM071600>
-8-
2003/4