AK4710 Datasheet, PDF (7/31 Pages) Asahi Kasei Microsystems – Low Power Single SCART Driver

[AK4710]
RECOMMENDED OPERATING CONDITIONS
(VSS1=VSS2=VSS3= 0V; Note 1)
Parameter
Symbol
Min
typ
max
Power Supply (Note 4)
VD1
3.13
3.3
3.47
VD2
3.13
3.3
3.47
VVD
3.13
3.3
3.47
VP
10.8
12
13.2
Note 1. All voltages with respect to ground.
Note 4. VVD must be connected to the same voltage.
Units
V
V
V
V
*AKM assumes no responsibility for the usage beyond recommended operating conditions in this datasheet.
ELECTRICAL CHARACTERISTICS
(Ta = 25°C; VP=12V, VD1=VD2=VVD= 3.3V)
Power Supplies
min
typ
Power Supply Current
Normal Operation (PDN = “H”)
(Note 5)
VD1+VD2+VVD
386
VP
48
Power-Down Mode (PDN = “L”)
(Note 6)
VD1+VD2
0
VVD
0
VP
48
Note 5. All video outputs active. No signal, no load for A/V switches, refer to the Table 3.
Note 6. All digital inputs are held at VVD or VSS3. No signal, no load for A/V switches.
max
TBD
TBD
TBD
TBD
TBD
Units
μA
μA
μA
μA
μA
DIGITAL CHARACTERISTICS
(Ta = 25°C; VD1=VD2=VVD= 3.13 ∼ 3.47V)
Parameter
Symbol
min
typ
High-Level Input Voltage
Low-Level Input Voltage
VIH
70%VVD
-
VIL
-
-
Low-Level Output Voltage
VOL
-
-
(SDA pin: Iout= 3mA)
Input Leakage Current
Iin
-
-
max
-
30%VVD
0.4
± 10
Units
V
V
V
μA
Rev. 0.3
2011/07
-7-