AKD4645A-A Datasheet, PDF (6/53 Pages) Asahi Kasei Microsystems – Evaluation board Rev.1 for AK4645A

ASAHI KASEI
OCKS1
0
1
X’tal
256fs
512fs
<default>
Table 3. AK4114 Master Clock Setting
„ Other jumper pins set up
[JP1] (GND) : Analog ground and Digital ground
OPEN : Separated.
SHORT : Common. (The connector “DGND” can be open.) <default>
[JP2] : Selection of MIN path or LIN3 path
MIN : MIN path (AIN3 bit=“0” : Register Address 21H)
LIN3 : LIN3 path (AIN3 bit=“1” : Register Address 21H)
[JP5, 4] : Selection of using MIC-power supply for L/RIN1 path
SHORT : MIC-power is supplied.
OPEN : MIC-power is not supplied. <default>
[JP3,6,7,8] : power AVDD,DVDD,HVDD,TVDD
short : for regulator (typ. 5.0V)<default>
open : Separated.
[JP11] (HPL) : Analog Output
BNC: Output from J1. <default>
HP: Output from J2.
[JP12] (LIN-SEL): Analog Input
LIN2: LIN2 Input.<default>
LIN3: LIN3 Input.
LIN4: LIN4 Input.
[JP13] (HPR) : Analog Output
BNC: Output from J4. <default>
HP: Output from J2.
[JP14] (RIN-SEL): Analog Input
LIN2 : RIN2 Input.<default>
LIN3: RIN3 Input.
LIN4: RIN4 Input
[JP15] (LOUT-SEL) : Analog Output
BNC: Output from J6. <default>
Mini-Jack: Output from J2.
[JP16] (ROUT-SEL) : Analog Output
BNC: Output from J8<default>
Mini-Jack: Output from J2.
[JP22] (MKFS) : MCLK Frequency
x1 : 256fs <default>
x2 : 512fs
x4 : 1024fs
[JP23] (BCFS) : BICK Frequency
32fs : 32fs frequency
64fs : 64fs frequency <default>
< KM094901>
-6-
[AKD4645A-A]
2009/10