AKD4368-B Datasheet, PDF (6/32 Pages) Asahi Kasei Microsystems – 24bit DAC with integrated Headphone Amplifier

[AKD4368-B]
Serial Control
The AK4368 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT3
(uP -IF) with PC by 10 wire flat cable packed with the AKD4368.
Connect
CSN
CCLK
PC
CDTI ^AKD4368
10 Wire Flat Cable
10pin Connector
10pin Header
Figure 5. Connect of 10 wire flat cable
(1) 3-wire Serial Control Mode <Default>
The jumper pins should be set to the followings.
JP7
CAD0
JP2
I2C_SEL
JP10
SDA
I2C
3-wire
(2) I²C-bus Control Mode
The jumper pins should be set to the followings.
(2-1) In case of using CAD0=0 (device address bits).
JP7
CAD0
JP2
I2C_SEL
JP10
SDA
I2C
3-wire
(2-2) In case of using CAD0=1 (device address bits).
JP7
CAD0
JP2
I2C_SEL
JP10
SDA
I2C
3-wire
<KM081301>
-6-
2006/02