AKD4363_05 Datasheet, PDF (6/34 Pages) Asahi Kasei Microsystems – 96kHz 24bit D/A converter with PLL

ASAHI KASEI
[AKD4363]
Control Software Manual
„ Set-up of evaluation board and control software
1. Set up the AKD4363 Rev.A according to previous term.
2. Connect IBM-AT compatible PC with AKD4363 Rev.A by 10-line type flat cable (packed with AKD4363 Rev.A).
Take care of the direction of 10pin header. (Please install the driver in the CD-ROM when this control software is
used on Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control
software”. In case of Windows95/98/ME, this installation is not needed. This control software does not operate on
Windows NT.)
3. Insert the CD-ROM labeled “AKD4363 Rev.A Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of “akd4363.exe” to set up the control program.
5. Then please evaluate according to the follows.
„ Operation flow
Keep the following flow.
1. Set up the control program according to explanation above.
2. Click “Port Reset” button.
„ Explanation of each buttons
1. [Port Reset] :
Set up the USB interface board (AKDUSBIF-A) .
2. [Write default] : Initialize the register of AK4363.
3. [All Write] :
Write all registers that is currently displayed.
4. [Function1] :
Dialog to write data by keyboard operation.
5. [Function2] :
Dialog to write data by keyboard operation.
6. [Function3] :
The sequence of register setting can be set and executed.
7. [Function4] :
The sequence that is created on [Function3] can be assigned to buttons and
executed.
8. [Function5]:
The register setting that is created by [SAVE] function on main window can
be assigned to buttons and executed.
9. [SAVE] :
Save the current register setting.
10. [OPEN] :
Write the saved values to all register.
11. [Write] :
Dialog to write data by mouse operation.
„ Indication of data
Input data is indicated on the register map. Red letter indicates “H” or “1” and blue one indicates “L” or “0”. Blank is the
part that is not defined in the datasheet.
<KM060703>
6
2005/04