AKD4363_05 Datasheet, PDF (1/34 Pages) Asahi Kasei Microsystems – 96kHz 24bit D/A converter with PLL

ASAHI KASEI
[AKD4363]
AKD4363
Evaluation board Rev.A for AK4363
GENERAL DESCRIPTION
The AKD4363 is an evaluation board for AK4363, 96kHz 24bit D/A converter with PLL. The AKD4363 has
a digital interface with AKM’s wave generator using ROM data and AKM’s A/D converter evaluation
boards. Therefore, it is easy to evaluate the AK4363.
„ Ordering guide
AKD4363 --- Evaluation board for AK4363
(Cable for connecting with printer port of IBM-AT compatible PC
and control software are packed with this.)
FUNCTION
• On-board clock generator
• Compatible with 2 types of interface
- Direct interface with AKM’s A/D converter evaluation boards
and direct interface with AKM’s signal generator(AKD43XX) by 10pin header
- On-board CS8414 as DIR which accepts optical input
• BNC connector for external clock input
• 10pin header for serial control interface
• On-board mute circuit for analog output
2.7∼5.5V GND
Opt In
ROM
or A/D
10pin Header
External
Clock
CS8414
(DIR)
DZF
Divider
AK4363
MCKO
MCKI
Mute
Clock
Generator
10pin Header
Control
Lch
Rch
Figure 1. AKD4363 Block Diagram
* Circuit diagram and PCB layout are attached at the end of this manual.
<KM060703>
1
2005/04