AKD4113-B Datasheet, PDF (6/21 Pages) Asahi Kasei Microsystems – 192kHz digital audio receiver

ASAHI KASEI
[AKD4113-B]
„ Toggle switch set-up
SW2 PDN
Reset switch for AK4113. Set to “H” during normal operation. Bring to “L” once after the
power is supplied.
„ LED indication
LE1 INT0
LE2 INT1
Bright when INT0 pin goes to “H”.
Bright when INT1 pin goes to “H”.
„ DIP switch (SW1) set-up: -off- means “L”
No. Switch Name
Function
1 IPS0
Set-up of IPS0 pin. (in parallel mode)
2 DIF0
Set-up of DIF0 pin. (in parallel mode)
3 DIF1
Set-up of DIF1 pin. (in parallel mode)
4 DIF2
Set-up of DIF2 pin. (in parallel mode)
5 IPS1/IIC
Set-up of IIC pin. (in serial mode) “L”: 4 wire Serial, “H”: IIC
6 P/SN
Set-up of P/SN pin. “L”: Serial mode, “H”: parallel mode
7 TEST
Don’t care
8 ACKS
Don’t care
„ DIP switch (SW3) set-up: -off- means “L”
No. Switch Name
Function
1 CM1
Set-up of CM1 pin. (in parallel mode)
2 OCKS1
Set-up of OCKS1 pin. (in parallel mode)
3 OCKS0
Set-up of OCKS0 pin. (in parallel mode)
4 PSEL
Don’t care
5 XTL0
Don’t care
6 XTL1
Don’t care
7 DIR_I/O
Set-up of the transmission direction of 74AC245
“L”: When inputting from PORT2, “H”: When outputting from PORT2
8 DIT_I/O
Don’t care
<KM076501>
-6-
2004/11