AKD4686-B Datasheet, PDF (5/55 Pages) Asahi Kasei Microsystems – AK4686 Evaluation Board Rev.0

[AKD4686-B]
(3) ADC with external DIT
1. Connection of connector
For analog input, RCA connector JL1(LIN1), JL2(LIN2), JL3(LIN3), JL4(LIN4), JL5(LIN5), JL6(LIN6) and
JR1(RIN1), JR2(RIN2), JR3(RIN3), JR4(RIN4), JR5(RIN5), JR6(RIN6) are available.
For digital (S/PDIF) output, RCA connector J13 (PORT1 TX1) is available.
2. Setting of jumper pin
Setting of interface signal of PORT1: AK4118 (U4) is as follows.
X1 (24.576MHz) is used as Clock (512fs) .
Jumper
Setting
JP19
XTI1
Open
JP20
JP21
JP22
JP23
JP24
MCKO1_SEL MCLK1_SEL BICK1_SEL LRCK1_SEL SDTO1_SEL
MCKO1
Short
Short
Short
Short
(Default)
Table 12. Setting of interface signal of PORT1: AK4118 (U4) (1/3)
3. Setting of toggle switch
Switch
SW2
SW5
Setting
H
L
Table 13. Setting of reset of PORT1 AK4118 (U4) (2/3)
4. Setting of DIP switch
Switch
Setting
DIF0
DIF1
DIF2
SW3
CM0
OCKS0
OCKS1
MS1
H
L
H
H
L
H
L
Table 14. Setting of interface signal of PORT1: AK4118 (U4) (3/3)
< KM103800>
-5-
2010/08