AK5576 Datasheet, PDF (49/69 Pages) Asahi Kasei Microsystems – 6-Channel Differential 32-bit ADC

[AK5576]
[2] Serial Control Mode
In 3-wire serial mode or I²C mode, PW1-6 bits control the power of AIN1-6 channels independently. AINn
channel is powered down when PWn bit = “0” (n=1-6) and AINn channel is in normal operation when
PWn bit = “1”. The power-down channel is reset status and outputs all “0”. The channel summation is
controlled by MONO1 and MONO2 bits. RSTN bit must be “0” when changing the setting of MONO1,
MONO2 and PW1-6 bits.
MONO2
bit
0
0
1
1
MONO1
Data on Slot (Normal Output)
bit
Slot6 Slot 5 Slot 4
Slot 3
Slot 2
Slot 1
0
CH6
CH5
CH4
CH3
CH2
CH1
1
All “0” All “0” All “0”
All “0” (CH5+6)/2 (CH1+2+3+4)/4
0
All “0” All “0” (CH5+6)/2 (CH5+6)/2 (CH3+4)/2
(CH1+2)/2
1
All “0” All “0” All “0”
All “0”
All “0” (CH1+2+3+4+5+6)/6
Table 17. Slot Data Assign (Serial Control mode, Normal Output & DSD mode)
MONO2
bit
0
0
1
1
MONO1
bit
0
1
0
1
Data on Slot (TDM128)
Slot6 Slot 5
Slot 4
Slot 3
Slot 2
Slot 1
CH6
CH5
CH4
CH3
CH2
CH1
All “0” All “0”
TDMI
TDMI (CH5+6)/2 (CH1+2+3+4)/4
All “0” All “0” (CH5+6)/2 (CH5+6)/2 (CH3+4)/2
(CH1+2)/2
All “0” All “0”
TDMI
TDMI
TDMI (CH1+2+3+4+5+6)/6
Table 18. Slot Data Assign (Serial Control Mode, TDM128)
MONO2
bit
0
0
1
1
MONO1
Data on Slot (TDM256, TDM512)
bit
Slot6 Slot 5
Slot 4
Slot 3
Slot 2
Slot 1
0
CH6
CH5
CH4
CH3
CH2
CH1
1
TDMI TDMI
TDMI
TDMI (CH5+6)/2 (CH1+2+3+4)/4
0
TDMI TDMI (CH5+6)/2 (CH5+6)/2 (CH3+4)/2
(CH1+2)/2
1
TDMI TDMI
TDMI
TDMI
TDMI (CH1+2+3+4+5+6)/6
Table 19. Slot Data Assign (Serial Control Mode, TDM256 & TDM512)
015016912-E-01
- 49 -
2016/01