AKD4126-A Datasheet, PDF (4/29 Pages) Asahi Kasei Microsystems – digital sample rate converter.

ASAHI KASEI
[AKD4126-A]
(1)-1-3. Set up SDTI1, SDTI2 and SDTI3
Select input data to SDTI1, SDTI2 and SDTI3 of the AK4126 (U1). When these jumper pins are set to SDTI
side, SDTO of the AK4114 (U2) is input to SDTI1, SDTI2 and SDTI3. When these jumper pins are set to
GND side, “0” data is input to SDTI1, SDTI2 and SDTI3.
(a) “0” data is input to SDTI1
JP1
SD T I1
(b) SDTO of the AK4114 (U2) is input to SDTI1
JP1
SD TI1
GND SDTI
(G ND)
(a) “0” data is input to SDTI2
JP3
SD TI2
GND SDTI
(SD T I)
(b) SDTO of the AK4114 (U2) is input to SDTI2
JP3
SD TI2
GND SDTI
(G ND)
(a) “0” data is input to SDTI3
JP5
SD TI3
GND SDTI
(SD T I)
(b) SDTO of the AK4114 (U2) is input to SDTI3
JP5
SD TI3
GND SDTI
(G ND)
GND SDTI
(SD T I)
(1)-1-4. Set up PLL Mode and Input Audio Interface Format of the AK4126 (U1)
Set up PLL Mode and Input Audio Interface Format of the AK4126 (U1) by SW1. About setting of
default, please refer to Table1. About setting except default, please refer to Table2 and Table3.
(1)-1-5. Set up Output Audio Interface Format, Clock Mode and Master Clock Frequency of the
AK4114 (U2)
Set up Output Audio Interface Format, Clock Mode and Master Clock Frequency of theAK4114 (U2)
by SW4. About setting of default, please refer to Table4. About setting except default, please refer to
Table5, Table6, and Table7.
<KM083203>
-4-
2007/01