|
AKD4120_06 Datasheet, PDF (32/47 Pages) Asahi Kasei Microsystems – Sample Rate Converter with Mixer and Volume | |||
|
◁ |
ASAHI KASEI
[AKD4120]
 Toggle switch set-up
SW2
Reset switch for AK4120, AK41112B and AK4114. Set to âHâ during operation. Bring to
âLâ once after the power is supplied.
 LED indication
1
Bright when ERF pin goes to âHâ.
 Serial Control
The AK4120 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT1
(CTRL) with PC by 10-wire flat cable packed with the AKD4120.
Be careful connector direction. Flat cable should be connected 10-pin header, red line put on 10pin header 5 and 6
pin.
1
10
CSN
Connect
CCLK/SCL
PC
CDTI/SDA AKD4120
CDTO/ACK
RED
5
6
10 wire flat cable 10 pin Connector
10 pin Header
Figure 6. Connection of 10-pin flat cable
<KM066802>
- 32 -
2006/12
|
▷ |