AKD5386-B-06 Datasheet, PDF (3/25 Pages) Asahi Kasei Microsystems – 24bit 192kHz A/D converter

ASAHI KASEI
[AKD5386-B]
„ Other jumper pins set up
1. JP2 (CKS1) : Setting of CKS1 pin for AK5386
Please refer to the setting of the AK5386 mode of page 4 Table 3.
H
: CKS1=”H”
L
: CKS1=”L” <Default>
2. JP3 (VA) : Select VA pin for AK5386
VA : Supply from VA connector.
REG : Supply from regulator. In this case, VA connector should be open. <Default>
3. JP4 (VD) : Select VD pin for AK5386
VD : Supply from VD connector.
REG : Supply from regulator. In this case, VD connector should be open. <Default>
4. JP5 (MCLK) : Select master clock of the AK5386.
SHORT : AK4114 supplies MCLK. <Default>
OPEN : PORT1 supplies MCLK.
5. JP6 (TX) : Select TX
OPT : Optical Connector (PORT2) is used. <Default>
BNC : BNC (J3) is used.
6. JP7 (AGND) : Analog ground 1 and Analog ground 2
SHORT : Common. <Default>
OPEN : Separated.
7. JP8 (GND) : Analog ground 1 and Digital ground
SHORT : Common. (The DGND connector can be open.) <Default>
OPEN : Separated. In this case, DGND connector should be 0V.
<KM082300>
-3-
2006/12