AK4456VN Datasheet, PDF (3/5 Pages) HuaXinAn Electronics CO.,LTD – 6ch Premium DAC

[AK4456]
4. Absolute Maximum Ratings
(AVSS =DVSS =0V; Note 1)
Parameter
Symbol
min
max
Unit
Power Supplies: Analog
Digital
|AVSS  DVSS|
AVDD
0.3
TVDD
0.3
GND
-
6.0
V
4.0
V
0.3
V
Input Current, Any Pin Except Supplies
IIN
-
10
mA
Digital Input Voltage
VIND
0.3
TVDD+0.3
V
Ambient Temperature (Power applied)
When the back tab is connected to VSS
Ta
40
105
C
When the back tab is open
Ta
40
85
C
Storage Temperature
Tstg
65
150
C
Note 1. All voltages with respect to ground.
Note 2. AVSS and DVSS must be connected to the same analog ground plane.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
5. Recommended Operation Conditions
(AVSS =DVSS =0V; Note 1)
Parameter
Symbol
min
typ max Unit
Analog
AVDD
3.0
5.0
5.5
V
Power Supplies
(LDOE pin= “L”) (Note 3)
I/O buffer
TVDD
VDD18
1.8
3.6
V
Digital
VDD18
1.7
1.8
1.98 V
(LDOE pin = “H”)(Note 4)
I/O buffer
TVDD
3.0
3.3
3.6
V
Voltage Reference “H” voltage reference “L” VREFH1-4 AVDD0.5 - AVDD V
(Note 5) voltage reference
VREFL1-4
-
AVSS
-
V
Note 3. TVDD must be powered up before VDD18 when the LDOE pin = “L”. The power up sequence
between AVDD and TVDD or AVDD and VDD18 is not critical.
Note 4. When LDOE pin = “H”, the internal LDO supplies 1.8V (typ). The power up sequences between
AVDD and TVDD, AVDD and VDD18 are not critical.
Note 5. VREFL1-3 pins must be connected to AVSS. Connect a capacitor which is 10µF or more to the each
VREFH1-3 pins.
* AKM assumes no responsibility for the usage beyond the conditions in this data sheet.
Rev. 0.0
2014/06
-3-