AKD4340-SB Datasheet, PDF (2/31 Pages) Asahi Kasei Microsystems – 192kHz sampling 24Bit ΔΣ DAC

ASAHI KASEI
[AKD4340-SB]
„ Operation sequence
1) Set up the power supply lines. (See “Other jumpers set-up”.)
Name
of jack
+15V
-15V
AGND
Color
of jack
Red
Blue
Black
Voltage
+12∼+15V
-4.5∼-13.2V
0V
Used for
Comments and attention
Regulator T1, T2
HVEE of AK4340
GND
This jack should be always connected to power supply.
This jack should be always connected to power supply.
This jack should be always connected to power supply.
Table 1. Set up of power supply lines
Each supply line should be distributed from the power supply unit.
2) Set-up the jumper pins
3) Set-up the DIP switches. (See the followings.)
4) Power on
The AK4340 should be reset once by bringing SW1 (PDN) “L” upon power-up.
Default
setting
+12V
-5V
0V
<KM079900>
2
2005/12