AK4385_06 Datasheet, PDF (17/23 Pages) Asahi Kasei Microsystems – 108dB 192kHz 24-Bit 2ch ΔΣ DAC

ASAHI KASEI
[AK4385]
„ Register Definitions
Addr Register Name
D7
D6
00H Control 1
ACKS
0
default
1
0
D5
D4
D3
D2
D1
D0
0
DIF2
DIF1 DIF0
PW
RSTN
0
0
1
0
1
1
RSTN: Internal timing reset control
0: Reset. All registers are not initialized.
1: Normal Operation
When MCLK frequency or DFS changes, the click noise can be reduced by RSTN bit.
PW: Power down control
0: Power down. All registers are not initialized.
1: Normal Operation
DIF2-0: Audio data interface formats (see Table 7)
Initial: “010”, Mode 2
ACKS: Master Clock Frequency Auto Setting Mode Enable
0: Disable, Manual Setting Mode
1: Enable, Auto Setting Mode
Master clock frequency is detected automatically at ACKS bit “1”. In this case, the setting of DFS1-0
are ignored. When this bit is “0”, DFS1-0 set the sampling speed mode.
Addr
01H
Register Name
Control 2
default
D7
DZFE
0
D6
DZFM
0
D5
SLOW
0
D4
DFS1
0
D3
DFS0
0
D2
DEM1
0
D1
DEM0
1
D0
SMUTE
0
SMUTE: Soft Mute Enable
0: Normal operation
1: DAC outputs soft-muted
DEM1-0: De-emphasis Response (see Table 8)
Initial: “01”, OFF
DFS1-0: Sampling speed control
00: Normal speed
01: Double speed
10: Quad speed
When changing between Normal/Double Speed Mode and Quad Speed Mode, some click noise
occurs.
SLOW: Slow Roll-off Filter Enable
0: Sharp Roll-off Filter
1: Slow Roll-off Filter
DZFE: Data Zero Detect Enable
0: Disable
1: Enable
Zero detect function can be disabled by DZFE bit “0”. In this case, the DZF pins of both channels are
always “L”.
MS0246-E-01
- 17 -
2006/01