AKD5373-A Datasheet, PDF (14/24 Pages) Asahi Kasei Microsystems – Evaluation board Rev.2 for AK5373

„ EEPROM Write program for the AK5373: AK5373EEPROM.exe
1) Set up the jumper pins as the followings.
JP15
P17
PC-EPAI PC-CSN
JP18
PC-SK
JP20
JP27
PC-EPAO REGMODE
[AKD5373-A]
EEP 5373
2) Connect USB2 Port of the AKD5373-A to PC with an USB cable. Windows recognizes the mirco controller
device automatically. Device manage shows “PICkit2 Microcontroller Programmer” in “Human Interface Devices”
if Windows recognizes the device successfully.
[KM101503]
Figure 16. Device Manger “Human Interface Devices”
- 14 -
2010/08