AKD5701 Datasheet, PDF (12/40 Pages) Asahi Kasei Microsystems – AK5701 Evaluation board Rev.0

ASAHI KASEI
„ The function of the toggle SW
[SW1] (DIT): Power control of AK4114. Keep “H” during normal operation.
Keep “L” when AK4114 is not used.
[SW3] (PDN): Power control of AK5701. Keep “H” during normal operation.
[AKD5701-A]
„ Indication for LED
[LED1] (ERF): Monitor INT0 pin of the AK4114. LED turns on when some error has occurred to AK4114.
„ Serial Control
The AK5701 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT3
(CTRL) with PC by 10-wire flat cable packed with the AKD5701-A
Connect
CSN
CCLK
PC
CDTI ^AKD5701-A
10 Wire Flat Cable
10pin Connector
10pin Header
Figure 2. Connect of 10 wire flat cable
<KM076903>
- 12 -
2005/04