AK8811_12 Datasheet, PDF (1/36 Pages) Asahi Kasei Microsystems – NTSC/PAL Digital Video Encoder

ASAHIKASEI
[AK8811/12]
AK8811/12
NTSC/PAL Digital Video Encoder
GENERAL DESCRIPTION
The AK8811 and AK8812 are low voltage, low power and small packaged Digital Video Encoder.
They are suitable for a portable DVD or VCD player. They convert ITU-R.BT601/656 standard 8-
bit parallel data into analog composite video, S-Video or analog component signals Y/Cb/Cr in
NTSC and PAL formats.
AK8812 and AK8811 support Macrovision Copy Protection Rev.7.1(only AK8812), Closed
captioning and Video Blanking ID(CGMS). These functions are controlled by high-speed I²C Bus
interface.
FEATURES
• NTSC-M, PAL-B,D,G,H,I,M,N encoding.
• Simultaneous composite video signal and S-video signal outputs
• Y/Cb/Cr Component output (Based on EIAJ Guideline)
• CCIR-656 4:2:2 8-bit Parallel Input
- EAV Decoding
• Master/Slave Operation
- Digital Field Sync I/O
- Digital Vertical/Horizontal Sync I/O
• Y filtering
2 x over-sampling
• C filtering
4 x over-sampling
• Single 27MHz Clock (The polarity could be inverted by SYSINV pin)
• Triple 10-bit DACs
• I²C Interface (400kHz)
• Closed Caption encoding (NTSC: line 21,284-SMPTE PAL: line 21,334-CCIR)
• Macrovision Copy Protection Rev. 7.1* (Only for AK8812)
• VBID, CGMS(EIAJ CPR-1024)
• On-chip Color bar generator
• Low Power Consumption
• 3.3V only, CMOS Monolithic
• 48pin LQFP Package
* This device is protected by U.S. patent numbers 4,631,603, 4,577,216, and 4,819,098, and other intellectual
rights. The use of Macrovision’s copy protection technology in the device must be authorized by Macrovision and
is intended for home and other limited pay-per -view use only, unless otherwise authorized in written by
Macrovision. Reverse engineering or disassembly is prohibited.
Rev.1.1
-1-
2000/01