AM2LV-NZ_16 Datasheet, PDF (3/4 Pages) AIMTEC – 2 Watt | DC-DC Converter

Recommended Filter Circuit
+ Vin
Cin +
Dual Output
Cout +
DC
DC
Cout ⁺
- Vin
+Vout
Common
+ Vin
Cin +
-Vout
- Vin
Series AM2LV-NZ
2 Watt | DC-DC Converter
Single Output
+Vout
Cout ⁺
DC
DC
- Vout
All the AM2LV-Z Series have been tested with the above recommended test circuit. This series should be tested under load.
If it is necessary to further decrease the input/output ripple, the value of the filter capacitor can be increased; a capacitor with a low ESR
should be used. Excessive filter capacitance can cause start up problems with the converter.
In general, the recommended capacitance values are:
Cin: 12V input 100μF, 24V input 10μF~47μF
Cout: 10μF/100mA
Refer to table below for maximum capacitor values:
External Capacitor Value
Single Output
Vout (VDC)
3.3
5
9
12
15
Cout (µF)
2200
1000
680
470
330
Dual Output
Vout (VDC)
±5
±9
±12
±15
Cout (µF)
±680
±470
±330
±220
Derating
www.aimtec.com
F 051e R8.G
Tel: [phone]
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only