AM100HB-UZ Datasheet, PDF (3/4 Pages) AIMTEC – 100 Watt | Half Brick DC-DC Converter

Derating:
Series AM100HB-UZ
100 Watt | Half Brick DC-DC Converter
E
100
D
C
80
60
A
B
40
Safe
Operating
20
Area
0
0
20
40
60 80⁸⁵ 100
Ambient Temperature º C
A
Free Air
B
100 LFM
C
200 LFM
D
300 LFM
E
400 LFM
Typical Application:
Aimtec’s half brick models can operate independently. However, to enhance their performance and to ensure precision of the
output signal parameters the following connections are recommended:
Output Ripple and Noise Measurement test setup:
Please refer to our Application note: Ripple and Noise Measurement of Brick & POL DC-DC Converters.
ON/OFF Control:
www.aimtec.com
F 054e R3.D
The converter output can be disabled by moving SW to position “a” –
connected to –Vin with voltage level between -0.7 and 0.4V.
When SW is open in position “b”, the converter is ON and operates
normally.
Tel: [phone]
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only