AMEL20-AZ_16 Datasheet, PDF (2/5 Pages) AIMTEC – 20 Watt | AC-DC / DC-DC Converter

Series AMEL20-AZ
20 Watt | AC-DC / DC-DC Converter
General Specifications (continued)
Parameters
Conditions
Typical
Maximum
Units
Short circuit protection
Auto recovery
Operating temperature
With derating over 50ºC
Refer to Chart
o_C
Maximum case temperature
100
o_C
Storage temperature
-45 to +95
o_C
Temperature coefficient
±0.02
% / ^oC
Cooling
Free air convection
Humidity
Non condensing
20 ~ 95
% RH
Case material
Plastic (flammability to UL 94V-0)
Weight
70
g
Dimensions (L x W x H)
56.48 x 30.86 x 25.10mm (2.22 x 1.21 x 0.99 inches)
MTBF
> 400 000 hrs (MIL-HDBK -217F, t=+25^oC)/ Full Load
> 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage
(115/230/277VAC) and at rated output load unless otherwise specified.
Environment Approval
Test
Parameters
Wave form
Shock
Acceleration amplitude
Bump duration
Converter operation
Vibration
Number of bumps
Test mode
Displacement
Acceleration
Converter operation
Conditions
Half sine wave
5gn
30ms
before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals
Standards
CE, UL, FCC, CB
Information Technology Equipment
Information Technology Equipment
EMI - Conducted and radiated emission
Harmonic Current Emissions
Voltage fluctuations and flicker
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
FCC
UL 60950-1: 2^nd Edition
CAN/CSA-C22.2 No.60950-1-07, 2^nd Edition
EN55022, class B
EN55024: 2010
IEC/EN 61000-3-2, Class A
IEC/EN 61000-3-3, :2008
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006 + A1: 2007 + A2:2010
IEC 61000-4-4: 2012
IEC 61000-4-5: 2005
IEC 61000-4-6: 2008
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004
47 CFR Part 15 Subpart B, ICES-003 Iss. 5-2012,
ANSI C63.4-2009
www.aimtec.com
F 052e R8.H
Tel: [phone]
2 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only