AMEL1-5SAZ Datasheet, PDF (2/4 Pages) AIMTEC – AC-DC Converter

Series AMEL1-AZ
1Watt | AC-DC Converter
Single Output Specifications
Parameters
Conditions
Typical
Voltage accuracy
Full load (typical)*
±5
Line regulation
LL-HL, Full Load
±5
Load regulation (single output)
0-100% load (typical)*
±5
Transient Recovery Time
200
Transient Response Deviation
25% load step
±2
Minimum load
0
3.3V&5V with 680 μF(E/C)
300
Ripple & Noise
12V&15V with 220uF (E/C)
300
24V with 470 uF (E/C)
200
*Ripple &Noisemeasuredat20MHz bandwidth with 0.1μFM/C and 115/230/277/480VAC (typical input)withFull Load.
Maximum
Units
%
%
%
µs
% of Vout
%
mV p-p
mV p-p
mV p-p
Dual Output Specifications
Parameters
Conditions
Typical
Voltage accuracy
Full load
±5
Line regulation
LL-HL
±5
Load regulation
0-100% load
±5
Cross regulation
25% load change
±5
Transient Recovery Time
200
Transient Response Deviation
25% load step
±2
Minimum load
0
Ripple & Noise
5D/12D/15D with 220uF (E/C)
200
512D with 220uF (E/C)
300
*Ripple &Noisemeasuredat20MHz bandwidth with 0.1μFM/C and 115/230/277/480VAC (typical input) with Full Load.
*5D/12D/15D Model with symmetric load change and 512D Model with asymmetric load change.
Maximum
Units
%
%
%
%
µs
% of Vout
%
mV p-p
mV p-p
Isolation Specifications
Parameters
Tested I/O voltage
Isolation Resistance
Conditions
30sec
Typical
>1000
Rated
3000
Units
VAC
MΩ
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100
KHz
Over Load protection
Folder back
>125%
Short circuit protection
Operating temperature
Storage temperature
Maximum Case temperature
Without Derating
Auto recovery
-40 to +80
o_C
-40 to +85
o_C
100
o_C
Humidity
Non condensing
20~95
% RH
Case material
Plastic resin + Fiberglass (flammability to UL 94V-0)
Weight
21
g
Dimensions (L x W x H)
MTBF
90-305VAC
90-528VAC
1.10 x 0.90 x 0.57 inches (28.00 x 23.00 x 14.50 mm)
1.10 x 0.90 x 0.67 inches (28.00 x 23.00 x 17.00 mm)
>400 000 hrs (MIL-HDBK -217F, t=+25^oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load
unless otherwise specified.
www.aimtec.com
F 052e R8.C
Tel: [phone]
2 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only