AM10EW-NZ Datasheet, PDF (2/3 Pages) AIMTEC – 10 Watt | DC-DC Converter

Series AM10EW-NZ
10 Watt | DC-DC Converter
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load
350
KHz
Operating temperature
See derating chart
-40 to +85
o_C
Storage temperature
-55 to +125
o_C
Max case temperature
105
o_C
Cooling
Free air convection
Humidity
Non condensing
95
%
Solder Temp Leads
1.5 mm from case 10
sec.
300
o_C
Case material
Aluminum Alloy
Weight
22
g
Dimensions (L x W x H)
MTBF
Tolerance ±0.5mm
2.00 x 1.00 x 0.46 inches 50.80 x 25.40 x 11.80mm
>1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25^oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input
voltage and at rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency Approvals
Designed to meet IEC 60950 1:2001
Pin Out Specifications
Pin
Single
1
Vin -
2
Vin +
3
+Vout
4
-Vout
Dimensions
50.80
(2.00)
20.32
(0.80)
3
2
Bottom View
1
DIA
1.00
(0.04)
Built-in Stand-offs to
ease PCB cleaning
4
50.8
(2.00)
Notes:
All dimensions are typical
in millimeters (inches).
Tolerance ±0.25 (±0.01)
www.aimtec.com
F 051e R12.B
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only