AMEPR30D-AZ_16 Datasheet, PDF (1/5 Pages) AIMTEC – AC-DC Constant current LED Driver

Click on Series name for product info on aimtec.com
Series AMEPR30D-AZ
up to 2A | AC-DC LED driver
FEATURES:
 AC-DC Constant current LED Driver
 Input range 90-264VAC/47-440Hz
 Active PFC with TRIAC dimmable^②
 Operating temperature -20 to 80°C
 Total Harmonic Distortion < 20%
Models
 5 Year Limited Warranty
Single output
Model
Max
Output
Power
(W)^①
Output
Voltage
Range
(V)
No Load
Output
Voltage
(V max.)
Output
Current (A)
AMEPR30D-5070AZ ^{+Suffix②}
35
36-50
64
0.7
AMEPR30D-4270AZ^{+Suffix②}
29.4
32-42
54
0.7
AMEPR30D-3670AZ^{+Suffix②}
25.2
24-36
52
0.7
AMEPR30D-36100AZ^{+Suffix②}
36
24-36
52
1
AMEPR30D-24125AZ^{+Suffix②}
30
12-24
34
1.25
AMEPR30D-24140AZ^{+Suffix②}
33.6
12-24
34
1.4
AMEPR30D-15200AZ^{+Suffix②}
30
8-15
23
2
①_{Exceeding the maximum output power will permanently damage the converter.}
 Leading or Trailing Edge Triac
 IP67 Case
 High Efficiency up to 87%
 SCP, Over Load Protection
Input Voltage
(VAC/Hz)
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
Efficiency
(%)
115
230
VAC
VAC
82
85
84
87
83
84
83
84
82
84
80
83
81
83
②_{Model Nomenclature for Ordering:}
Add Suffix “-U”
Universal AC input 90-264VAC, (no TRIAC dimming option)
Add Suffix “-110”
AC input 90-135VAC, 115VAC typical value
Add Suffix “-220”
AC input 180-264VAC, 230VAC typical value
NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-
sale
AMEPR30D-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with
the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone
to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause
early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge
suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations
prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters
Inrush current <2ms (cold start)
Leakage current
AC current
Power Factor
External fuse
Start up time
Conditions
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
Recommended slow blow type
Typical
15
30
0.25
500
350
200
Maximum
0.9
0.9
1
Units
A
mA
mA
A
ms
Output Specifications
Parameters
Current accuracy
Line regulation
Load regulation
Conditions
LL-HL
0-100% load
Typical
±7
±10
±7
Maximum
Units
%
%
%
www.aimtec.com
F 052.1e R3.S
Tel: [phone]
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only