30C50 Datasheet, PDF (2/3 Pages) American Electronic Components, inc – Industry Standard Mounting

30C50
definite purpose contactor
General Specifications
Initial Operate Time
Release Time
Bounce Time
mS 30
mS 15 (typical)
mS ≤ 10
Arc Cover
Insulation System
Initial Dielectric Strength
between contacts and coil
between poles
between open contacts
Temperature Range
Unit Weight (approx.)
* Must use ring terminals
Standard
UL Class B 130°C
VAC 2200
VAC 2200 (includes shunt)
VAC 2200
°C -40 ... +65
3 pole 22.4 oz
Table 2
Terminations
Coil Terminals
Power Terminals
0.250” QC + #6-32 screw
(dual 0.250” QC optional) -
per terminal
screw _{#1/4-20 Screw (with or with-}
out sems plate)
box lug
14-2 AWG
Recommended Tightening
Torque
Wire size
#1/4-20
box lug
#1/4-20
box lug
40 in.lbf (4.53 Nm)
50 in.lbf (5.65 Nm)
16-8AWG*
14-2AWG
Ordering Codes
Type
Contact
material
Contact
arrangement
Cover protection and
terminations
30C50 - 102
-1
-
Contact Ratings
50
- 50 FLA
Contact Material
10
- AgCdO (standard)
70
- AgSnOInO
Contact number & arrangement
22
- DPST-NO
23
- 3PST-NO
Cover protection category
1
- IP00, no overall cover
T
Terminals
L
Terminals
Termination Codes (see drawings for full specifications)
1
- #10-32 combination philips screw with quad QC blades
2
- Same as 1 with sems screw and pressure plate
3
- #14-4AWG box lug with quad QC blades (box lug with quick connect)
4
- #14-4AWG box lug with dual QC blades (box lug with quick connect) (standard for 40FLA)
5
- #10-32 combination phillips screw with dual QC blades (standard for 20-30FLA)
6
- #14-2AWG box lug with QC blades (standard for 50-60FLA)
7
- #14-1AWG box lug with QC blades (standard for 75-150FLA)
Reserved for Customer Specific Requirements
001
- Dual 0.25” QC blades for coil terminations
002
- 999 - optional customer specific number
Coil code
see Table 1
Special options
-
Page 2 of 3
www.aecsensors.com
Ref: 30C50 101711JHM
Sales Department Tel: [phone]