APT35GP120B2DQ2 Datasheet, PDF (2/9 Pages) Advanced Power Technology – POWER MOS 7 IGBT

DYNAMIC CHARACTERISTICS
Symbol
C_ies
C_oes
C_res
V_GEP
Q_g
Q_ge
Q_gc
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Gate-to-Emitter Plateau Voltage
Total Gate Charge ³
Gate-Emitter Charge
Gate-Collector ("Miller ") Charge
RBSOA Reverse Bias Safe Operating Area
t_d(on)
t_r
t_d(off)
t_f
E_on1
E_on2
E_off
t_d(on)
t_r
t_d(off)
t_f
E_on1
E_on2
E_off
Turn-on Delay Time
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ⁴
Turn-on Switching Energy (Diode) ⁵
Turn-off Switching Energy ⁶
Turn-on Delay Time
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ^{4 4}
Turn-on Switching Energy (Diode) ⁵⁵
Turn-off Switching Energy ⁶
APT35GP120B2DQ2(G)
Test Conditions
MIN
Capacitance
V_GE = 0V, V_CE = 25V
f = 1 MHz
Gate Charge
V_GE = 15V
V_CE = 600V
I_C = 35A
T_J = 150°C, R_G = 4.3Ω, V_GE =
15V, L = 100µH,V_CE = 960V
140
Inductive Switching (25°C)
V_CC = 600V
V_GE = 15V
I_C = 35A
R_G = 4.3Ω
T_J = +25°C
Inductive Switching (125°C)
V_CC = 600V
V_GE = 15V
I_C = 35A
R_G = 4.3Ω
T_J = +125°C
TYP
3240
250
31
7.5
150
21
60
16
20
95
40
750
1305
680
16
20
145
75
750
2130
1745
MAX
UNIT
pF
V
nC
A
ns
µJ
ns
µJ
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
R_θJC
R_θJC
W_T
Characteristic
Junction to Case (IGBT)
Junction to Case (DIODE)
Package Weight
MIN TYP MAX UNIT
.23
°C/W
.61
5.9
gm
1 Repetitive Rating: Pulse width limited by maximum junction temperature.
2 For Combi devices, I_ces includes both IGBT and FRED leakages
3 See MIL-STD-750 Method 3471.
4 E_on1 is the clamped inductive turn-on energy of the IGBT only, without the effect of a commutating diode reverse recovery current
adding to the IGBT turn-on loss. Tested in inductive switching test circuit shown in figure 21, but with a Silicon Carbide diode.
5 E_on2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching
loss. (See Figures 21, 22.)
6 E_off is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.)
APT Reserves the right to change, without notice, the specifications and information contained h