ADUC7034 Datasheet, PDF (94/142 Pages) Analog Devices – Integrated Precision Battery Sensor for Automotive

ADuC7034
Preliminary Technical Data
GPIO Port1 Data Register
Name:
GP1DAT
Address:
0xFFFF0D30
Default Value: 0x000000XX
Access:
Read/write
Function:
This 32-bit MMR configures the direction of the GPIO pins assigned to Port1 (see Table 57). This register also sets the
output value for GPIO pins configured as outputs and reads the status of GPIO pins configured as inputs.
Table 62. GP1DAT MMR Bit Designations
Bit
Description
31 to 26 Reserved. These bits are reserved and should be written as 0 by user code.
25
Port 1.1 Direction Select Bit.
This bit is cleared to 0 by user code to configure the GPIO pin assigned to Port 1.1 as an input.
This bit is set to 1 by user code to configure the GPIO pin assigned to Port 1.1 as an output.
24
Port 1.0 Direction Select Bit.
This bit is cleared to 0 by user code to configure the GPIO pin assigned to Port 1.0 as an input.
This bit is set to 1 by user code to configure the GPIO pin assigned to Port 1.0 as an output.
23 to 18 Reserved. These bits are reserved and should be written as 0 by user code.
17
Port 1.1 Data Output. The value written to this bit appears directly on the GPIO pin assigned to Port 1.1.
16
Port 1.0 Data Output. The value written to this bit appears directly on the GPIO pin assigned to Port 1.0.
15 to 2 Reserved. These bits are reserved and should be written as 0 by user code.
1
Port 1.1 Data Input. This bit is a read only bit that reflects the current status of the GPIO pin assigned to Port 1.1. User code should
write 0 to this bit.
0
Port 1.0 Data Input. This bit is a read only bit that reflects the current status of the GPIO pin assigned to Port 1.0. User code should
write 0 to this bit.
Rev. Pr.A | Page 94 of 142