ADM232A_15 Datasheet, PDF (9/11 Pages) Analog Devices – CMOS RS-232 Drivers/Receivers

ADM222/ADM232A/ADM242
10.00 (0.3937)
9.80 (0.3858)
16
4.00 (0.1575)
3.80 (0.1496) ¹
9 _{6.20 (0.2441)}
8 ^{5.80 (0.2283)}
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
1.27 (0.0500)
BSC
0.51 (0.0201)
0.31 (0.0122)
1.75 (0.0689)
1.35 (0.0531)
8°
0°
SEATING
PLANE
0.25 (0.0098)
0.17 (0.0067)
0.50 (0.0197) _45°
0.25 (0.0098)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-AC
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 16. 16-Lead Standard Small Outline Package [SOIC_N]
Narrow Body
(R-16)
Dimensions shown in millimeters and (inches)
11.75 (0.4626)
11.35 (0.4469)
18
10
7.60 (0.2992)
7.40 (0.2913)
1
9
10.65 (0.4193)
10.00 (0.3937)
0.30 (0.0118)
0.10 (0.0039)
COPLANARITY
0.10
1.27
(0.0500)
BSC
0.51 (0.0201)
0.31 (0.0122)
2.65 (0.1043)
2.35 (0.0925)
8°
0°
SEATING
PLANE
0.33 (0.0130)
0.20 (0.0079)
0.75 (0.0295) _45°
0.25 (0.0098)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-013-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 17. 18-Lead Standard Small Outline Package [SOIC_W]
Wide Body
(RW-18)
Dimensions shown in millimeters and (inches)
REV. B
–9–