UG-291 Datasheet, PDF (8/16 Pages) Analog Devices – The SDP-S board is designed to be used in conjunction

UG-291
Pin No.
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
Pin Name
DNU
DNU
DNU
GND
DNU
DNU
DNU
DNU
DNU
GND
VIO (+3.3V)
GND
GND
NC
NC
SDP-S User Guide
Description
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Connect to the ground plane of the daughter board.
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Do not use. Leave this pin unconnected. Do not ground.
Connect to the ground plane of the daughter board.
3.3 V output. 20 mA maximum current available to power the I/O voltage on the daughter board.
Connect to the ground plane of the daughter board.
Connect to the ground plane of the daughter board.
No connect. Leave this pin unconnected. Do not ground.
No connect. Leave this pin unconnected. Do not ground.
Rev. A | Page 8 of 16