UG-490 Datasheet, PDF (7/28 Pages) Analog Devices – Full-featured evaluation board

Evaluation Board User Guide
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The evaluation board software is available to download from
the evaluation board page on Analog Devices website. Click
the setup.exe file to run the install. The default location for the
software is C:\Program Files (x86)\Analog Devices\
AD7960_61 Evaluation Software.
Install the evaluation software before connecting the evaluation
board and EVAL-SDP-CH1Z board to the USB port of the PC
to ensure that the evaluation system is correctly recognized when
connected to the PC.
There are two parts of the software installation process:
• AD7960 evaluation board software installation
• EVAL-SDP-CH1Z board driver installation
Figure 3 to Figure 9 show the separate steps to install the
AD7960 evaluation software while Figure 10 to Figure 14
show the separate steps to install the EVAL-SDP-CH1Z drivers.
Proceed through all of the installation steps to allow the soft-
ware and drivers to be placed in the appropriate locations.
Only after the software and drivers have been installed, should
you connect the EVAL-SDP-CH1Z board to the PC.
EVAL-AD7960FMCZ
Figure 5. AD7960 Install Window 2
Figure 3. User Account Control
Figure 6. AD7960 Install Window 3
Figure 4. AD7960 Install Window 1
Rev. 0 | Page 7 of 28
Figure 7. AD7960 Install Window 4