UG-490 Datasheet, PDF (1/28 Pages) Analog Devices – Full-featured evaluation board

Evaluation Board User Guide
EVAL-AD7960FMCZ
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
Evaluating the AD7960 18-Bit, 5 MSPS PulSAR Differential ADC
FEATURES
Full-featured evaluation board for the AD7960
Versatile analog signal conditioning circuitry
On-board reference, reference buffers, and ADC drivers
System demonstration board compatible (EVAL-SDP-CH1Z)
PC software for control and data analysis of time and
frequency domain
EVALUATION KIT CONTENTS
EVAL-AD7960FMCZ evaluation board
ADDITIONAL EQUIPMENT AND SOFTWARE
NEEDED
System demonstration platform (EVAL-SDP-CH1Z)
Precision source
World-compatible, 12 V dc supply adapter (enclosed with
EVAL-SDP-CH1Z)
Power supply, +7 V/−2.5 V (optional)
USB cable
SMA cable
ONLINE RESOURCES
Documents Needed
AD7960 data sheet
EVAL-AD7960FMCZ user guide
Required Software
EVAL-AD7960FMCZ evaluation software
Design and Integration Files
Schematics, layout files, bill of materials
GENERAL DESCRIPTION
The EVAL-AD7960FMCZ is an evaluation board designed
to demonstrate the low power AD7960 performance (18-bit,
5 MSPS PulSAR® differential ADC) and to provide an easy-to-
understand interface for a variety of system applications. A
full description of the AD7960 is available in the data sheet
and should be consulted when utilizing this evaluation board.
The user PC software executable controls the evaluation board
over the USB through the Analog Devices, Inc., system
demonstration platform board (SDP), EVAL-SDP-CH1Z.
On-board components include the following:
ADR4520/ADR4540/ADR4550: high precision, buffered band
gap 2.048 V/4.096 V/5.0 V reference options
AD8031: reference buffer
ADA4899-1/ADA4897-1: a signal conditioning circuit with
two op amps and an option to use a differential amplifier
(ADA4932-1)
ADP7102, ADP7104, ADP124, and ADP2300: regulators to
derive necessary voltage levels on board
This evaluation board interfaces to the SDP board via a 160-pin
FMC connector. SMA connectors, JP1/JP4 and JP2/JP5, are
provided for the low noise analog signal source.
TO +12V WALL WART
SIGNAL SOURCE
SMA
CONNECTOR
USB
PC
Figure 1. Setting Up the EVAL-AD7960FMCZ
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 28