HMC589AST89E Datasheet, PDF (7/7 Pages) Analog Devices – InGaP HBT GAIN BLOCK

Evaluation PCB ^[3]
HMC589AST89E
v01.0516
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
List of Materials for Evaluation PCB EV1HMC589AST89 ^[1]
Item
J1 - J2
J3 - J4
C1, C2
C3
C4
C5
R1
L1
U1
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 µF Capacitor, Tantalum
Resistor, 1206 Pkg.
Inductor, 0603 Pkg.
HMC589AST89 / HMC589AST89E
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
108370 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Evaluation board tuned for 1.9 GHz, 1/8W operation
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: [phone] • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
6