UG-630 Datasheet, PDF (6/8 Pages) Analog Devices – Evaluation Board User

UG-630
BILL OF MATERIALS
Table 1. Bill of Materials
Qty Reference Designator
1 U1
2 C23, C28
2 C3, C8
42 R1 to R27, R29, R31, R33, R43 to R45,
R47 to R49, R51 to R53, R55 to R57
7 C1 to C5, C15, C16
2 P1, P2
14 P1A to P12A, P13, P14
2 P5B, P12B
8 P1B to P4B, P7B to P10B
12 J1 to J5, J7 to J11, J13, J14
1 _{DNI = do not install.}
Evaluation Board User Guide
Description
DUT
0.1 µF, 16 V, 10%, 0603
0805 bypass capacitor position
0805 pad for optional, application-specific
connections
0603 pad for optional, application-specific
connections
Terminal block
2-pin header, 200 mil spacing (not installed)
3-pin header 100 mil spacing
2-pin header 100 mil spacing
SMA edge connector (not installed)
Part Number¹
Analog Devices, Inc., ADuM1441ARQZ
DNI
DNI
DNI
DNI
On-Shore Technology, Inc., OSTTC022162
Samtec MTSW-202-12-G-S-730
FCI, 90726-403HLF
Samtec HTSW-102-07-T-S
Johnson/Emerson Network Power
Connectivity Solutions, Inc., 142-0701-851
Rev. 0 | Page 6 of 8