OP77_15 Datasheet, PDF (6/16 Pages) Analog Devices – Next Generation OP07 Ultralow Offset Voltage Operational Amplifier

OP77
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter¹
Supply Voltage
Differential Input Voltage
Input Voltage²
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Junction Temperature (TJ)
Lead Temperature (Soldering, 60 sec)
Rating
±22 V
±30 V
±22 V
Indefinite
−65°C to +150°C
−25°C to +85°C
−65°C to +150°C
300°C
1_{Absolute Maximum Ratings apply to both dice and packaged parts, unless}
otherwise noted.
2_{For supply voltages less than ±22 V, the absolute maximum input voltage is}
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
Table 6.
Package Type
8-Pin TO-99 H-08 (J Suffix)
8-Lead Hermetic CERDIP Q-8 (Z Suffix)
θJA1 θJC Unit
150 18 °C/W
148 16 °C/W
1_{θJA is specified for worst-case mounting conditions, i.e., θJA is specified for a}
device in socket for the TO-99 and CERDIP packages.
ESD CAUTION
Rev. E | Page 6 of 16