ADSP-BF707 Datasheet, PDF (58/85 Pages) –

Connectors
HADC Connector (JP1)
JP1 allows the VDD_RTC signal to be connected to HADC0_VIN0 with the
installation of a jumper across pins 1 and 2. Pin 3 is not connected. Pin 4
allows the user to probe HADC0_VIN1 which is connected to an RC timer
driven by TM0_TMR3 on PC_05.
Part Description
2x2 0.1” header
Jumper for pins 1 and 2, probe for
pin 4
Manufacturer
SAMTEC
Mating Devices
SD Connector (J6)
Part Number
TSM-102-01-T-DV
Part Description
SD 8-bit, 2 GB
2 GB
Manufacturer
SANDISK
Mating Card
SANDISK
CAN0 Connector (J4)
Part Number
MHC-W21-601
SDSDB-2048-A11
Part Description
RJ11 vertical
Manufacturer
DIGIKEY
Mating Cable
RJ11 cable
Part Number
A31431-ND
2-24
ADSP-BF707 EZ-KIT Lite Evaluation System Manual