UG-1042 Datasheet, PDF (5/24 Pages) Analog Devices – Fully featured evaluation board for 10-lead precision

Easy to Use AD4000 Series16-/18-Bit Precision SAR ADCs User Guide
UG-1042
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The evaluation board software can be downloaded from the
relevant product page on the Analog Devices website.
Install the software before connecting the SDP-H1 board to the
USB port of the PC. This ensures that the SDP-H1 board is
recognized when it connects to the PC.
1. Start the Windows® operating system and download the
software from the relevant product page on the Analog
Devices website.
2. Unzip the downloaded file. Run the setup.exe file.
3. After installation is completed, power up the evaluation
board as described in the Power Supplies section.
4. Plug the evaluation board into the SDP-H1 board and the
SDP-H1 board into the PC using a USB cable.
5. When the software detects the evaluation board, proceed
through any dialog boxes that appear to finalize the
installation.
The default location for the software is the following:
C:\Program Files\Analog Devices\AD40XX Evaluation
Software\EVAL-AD40XX.
This location contains the executable software and example files.
INSTALLATION STEPS
Proceed through the installation, allowing the software and
drivers to be placed in the appropriate locations. Connect the
SDP-H1 board to the PC only after the software and drivers are
installed.
There are two parts to the software installation. First, install the
software related to the evaluation board, as follows:
1. Launch the evaluation board software installation by
clicking the setup.exe file. The software installation
window opens as shown in Figure 3.
2. Choose the folder location for installation and click Next.
The default folder is shown in Figure 4.
Figure 4. Destination Directory
3. Accept the National Instruments software license
agreement and click Next.
Figure 5. License Agreement
4. Click Next again to install the software.
Figure 3. Evaluation Software Install
Figure 6. Start Installation
Rev. B | Page 5 of 24