OP162 Datasheet, PDF (5/16 Pages) Analog Devices – 15 MHz Rail-to-Rail Operational Amplifiers

OP162/OP262/OP462
ABSOLUTE MAXIMUM RATINGS
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 V
Input Voltage¹ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 V
Differential Input Voltage² . . . . . . . . . . . . . . . . . . . . . ± 0.6 V
Internal Power Dissipation
SOIC (S) . . . . . . . . . . . . . . . . . . . Observe Derating Curves
TSSOP (RU) . . . . . . . . . . . . . . . . Observe Derating Curves
Output Short-Circuit Duration . . . . Observe Derating Curves
Storage Temperature Range . . . . . . . . . . . . –65∞C to +150∞C
Operating Temperature Range . . . . . . . . . . –40∞C to +125∞C
Junction Temperature Range . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature Range (Soldering, 10 sec) . . . . . . . +300∞C
Package Type
␪_JA3
␪_JC
Units
8-Lead SOIC (S)
158
8-Lead TSSOP (RU)
240
14-Lead SOIC (S)
120
14-Lead TSSOP (RU)
180
43
∞C/W
43
∞C/W
36
∞C/W
35
∞C/W
NOTES
1_{For supply voltages greater than 6 volts, the input voltage is limited to less than or}
equal to the supply voltage.
2_{For differential input voltages greater than 0.6 volts the input current should be}
limited to less than 5 mA to prevent degradation or destruction of the input devices.
3_{qJA is specified for the worst case conditions, i.e., qJA is specified for device soldered}
in circuit board for SOIC and TSSOP packages.
ORDERING GUIDE
Model
Temperature
Range
Package
Description
OP162GS –40∞C to +125∞C
OP162DRU –40∞C to +125∞C
OP162HRU –40∞C to +125∞C
OP262DRU –40∞C to +125∞C
OP262GS –40∞C to +125∞C
OP262HRU –40∞C to +125∞C
OP462DRU –40∞C to +125∞C
OP462DS –40∞C to +125∞C
OP462GS –40∞C to +125∞C
OP462HRU –40∞C to +125∞C
8-Lead SOIC
8-Lead TSSOP
8-Lead TSSOP
8-Lead TSSOP
8-Lead SOIC
8-Lead TSSOP
14-Lead TSSOP
14-Lead SOIC
14-Lead SOIC
14-Lead TSSOP
Package
Option
RN-8
RU-8
RU-8
RU-8
RN-8
RU-8
RU-14
RN-14
RN-14
RU-14
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the OP162/OP262/OP462 features proprietary ESD protection circuitry, permanent
damage may occur on devices subjected to high energy electrostatic discharges. Therefore, p roper
ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. D
–5–