OP07Z Datasheet, PDF (5/16 Pages) Analog Devices – Ultralow Offset Voltage Operational Amplifier

Data Sheet
OP07
Parameter
OUTPUT CHARACTERISTICS
TA = 25°C
Output Voltage Swing
−40°C ≤ TA ≤ +85°C
Output Voltage Swing
DYNAMIC PERFORMANCE
TA = 25°C
Slew Rate
Closed-Loop Bandwidth
Open-Loop Output Resistance
Power Consumption
Offset Adjustment Range
Symbol Conditions
VO
RL ≥ 10 kΩ
RL ≥ 2 kΩ
RL ≥ 1 kΩ
VO
RL ≥ 2 kΩ
SR
RL ≥ 2 kΩ³
BW
AVOL = 1⁵
RO
VO = 0, IO = 0
Pd
VS = ±15 V, No load
VS = ±3 V, No load
RP = 20 kΩ
Min Typ Max Unit
±12.0 ±13.0
V
±11.5 ±12.8
V
±12.0
V
±12 ±12.6
V
0.1 0.3
V/μs
0.4 0.6
MHz
60
Ω
80
150 mW
4
8
mW
±4
mV
1 _{Input offset voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power.}
2 _{Long-term input offset voltage stability refers to the averaged trend time of VOS vs. the time over extended periods after the first 30 days of operation. Excluding the}
initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5 μV. Refer to the Typical Performance Characteristics section. Parameter is
sample tested.
3 _{Sample tested.}
4 _{Guaranteed by design.}
5 _{Guaranteed but not tested.}
Rev. G | Page 5 of 16