EVAL-AD7764_15 Datasheet, PDF (5/23 Pages) Analog Devices – Evaluation Board for AD7764/AD7765 using

Preliminary Technical Data
EVAL-AD7764/AD7765EDZ
SOFTWARE INSTRUCTIONS FOR FIRST-TIME USE
INSTALLING THE SOFTWARE
The EVAL-AD7764/AD7765 evaluation board includes self-
installing software on CD ROM, for controlling and evaluating
the performance of the AD7764/AD7765 when it is operated
with the EVAL-CED1Z board. The software is compatible with
Windows® 2000/XP®. If the setup file does not run
automatically, setup.exe can be run from the CD-ROM.
When the CD is inserted into the PC, an installation program
automatically begins. This program installs the evaluation
software. The user interface on the PC
is a dedicated program written especially for the
AD7764/AD7765 when operating with the EVAL-CEDZ board.
The software should be installed before the USB cable is
connected between the EVAL-CEDZ and the PC. This ensures
that the appropriate USB driver files have been properly
installed before the EVAL-CEDZ is connected to the PC.
When the software is run for the first time with the EVAL-
CEDZ board connected to the PC, the PC will automatically
find the new device and will identify it. Follow the onscreen
instructions that appear automatically. This installs the drivers
for the CED on the PC. If an error appears on screen when the
software is first opened, then the PC is not recognizing the USB
device. This error is corrected by
1. Opening the PC’s Device Manager. The Device
Manager is accessed by right clicking on the My
Computer Icon, and selecting Properties. When the
System Properties Window opens, select the Hardware
tab.
2. Click on Device Manager in the Hardware Tab of the
System Properties window.
3. Examine the devices listed under the Universal Serial
Bus Controller heading.
4. If an unknown device is listed, right click on this
option and select, Update Driver.
5. The New Hardware Wizard will run twice, and under
the ADI Development Tools the following hardware is
listed:
ADI Converter Evaluation and Development Board (WF)
6. Reboot the PC.
Figure 2.EVAL- AD7764/AD7765EDZ Setup Dialog Box, Initial Software Install
Screen
3. The destination directory can be chosen using the default
clicking “Next” as shown in Figure 3). If a different location
than the default is preferred, click Browse and select the
desired location. When ready, click Next.
Figure 3. Choose the Destination of the AD7764/AD7765 Software
4. Accept the license agreement by selecting the correct
option and clicking “Next” as shown in Figure 4.
This section describes how the evaluation board, the EVAL-
CEDZ and the software should be set up to begin using the
complete system.
1. Insert the CD into the appropriate computer drive.
2. The dialog box shown in Figure 2 appears.
Figure 4. Accept license agreement
Rev. PrC | Page 5 of 23