ADP1720-EP Datasheet, PDF (5/12 Pages) Analog Devices – 50 mA, High Voltage, Micropower Linear Regulator

Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
IN to GND
OUT to GND
EN to GND
ADJ to GND
Storage Temperature Range
Operating Junction
Temperature Range
Soldering Conditions
Rating
–0.3 V to +30 V
–0.3 V to IN or +6 V
(whichever is less)
–0.3 V to +30 V
–0.3 V to +6 V
–65°C to +150°C
–55°C to +125°C
JEDEC J-STD-020
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADP1720-EP
THERMAL RESISTANCE
θ_JA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3. Thermal Resistance
Package Type
θ_JA
8-Lead MSOP
246
θ_JC
Unit
66
°C/W
ESD CAUTION
Rev. A | Page 5 of 12