AD8638_07 Datasheet, PDF (5/20 Pages) Analog Devices – 16 V Auto-Zero, Rail-to-Rail Output Operational Amplifiers

ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
Supply Voltage
Input Voltage
Input Current¹
Differential Input Voltage²
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
16 V
GND − 0.3 V to VSY+ + 0.3 V
±10 mA
±VSY
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
1 _{Input pin has clamp diodes to power the supply pins. Input current should}
be limited to 10 mA or less whenever input signals exceed the power supply
rail by 0.5 V.
2 _{Differential input voltage is limited to 5 V or the supply voltage, whichever is less.}
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
AD8638/AD8639
THERMAL RESISTANCE
Table 5. Thermal Resistance
Package Type
θJA1
θJC
Unit
5-Lead SOT-23 (RJ-5)
230
146
°C/W
8-Lead SOIC_N (R-8)
158
43
°C/W
8-Lead MSOP (RM-8)
206
44
°C/W
8-Lead LFCSP_WD (CP-8-5)² 75
18
°C/W
1 _{θJA is specified for the worst-case conditions, that is, a device soldered in a}
circuit board for surface-mount packages. This was measured using a
standard two-layer board.
2 _{Exposed pad is soldered to the application board.}
ESD CAUTION
Rev. C | Page 5 of 20