OP249 Datasheet, PDF (4/17 Pages) Analog Devices – Dual, Precision JFET High Speed Operational Amplifier

OP249
ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Input Voltage²â£ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Differential Input Voltage²â£ . . . . . . . . . . . . . . . . . . . . . . . 36 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range . . . . . . . . . . . . –65°C to +175°C
Operating Temperature Range
OP249A (J, Z, RC) . . . . . . . . . . . . . . . . . . –55°C to +125°C
OP249E, F (J, Z) . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
OP249G (P, S) . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature
OP249 (J, Z, RC) . . . . . . . . . . . . . . . . . . . –65°C to +175°C
OP249 (P, S) . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . +300°C
Package Type
␪_JA3
␪_JC
Units
TO-99 (J)
145
16
8-Lead Hermetic DIP (Z) 134
12
8-Lead Plastic DIP (P)
96
37
20-Terminal LCC (RC)
88
33
8-Lead SO (S)
150
41
°C/W
°C/W
°C/W
°C/W
°C/W
NOTES
1_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
2_{For supply voltages less than ± 18 V, the absolute maximum input voltage is equal}
to the supply voltage.
3_{θJA is specified for worst case mounting conditions, i.e., θJA is specified for device}
in socket for TO, cerdip, P-DIP, and LCC packages; θJA is specified for device
soldered to printed circuit board for SO package.
ORDERING GUIDE¹
Model
OP249AZ²
OP249ARC/883
OP249EJ
OP249FZ
OP249GP
OP249GS³
OP249GS-REEL
OP249GS-REEL7
Temperature Range
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package Descriptions²
8-Lead Cerdip
20-Terminal LCC
TO-99 H-08A
8-Lead Cerdip
8-Lead Plastic DIP
8-Lead SO
8-Lead SO
8-Lead SO
Package Options
Q-8
E-20A
H-08A
Q-8
N-8
SO-8
SO-8
SO-8
NOTES
1_{Burn-in is available on commercial and industrial temperature range parts in cerdip, plastic DIP, and TO-can packages.}
2_{For devices processed in total compliance to MIL-STD-883, add/883 after part number. Consult factory for 883 data sheet.}
3_{For availability and burn-in information on SO and PLCC packages, contact your local sales office.}
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP249 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. C