ADUM1301ARWZ-RL Datasheet, PDF (4/32 Pages) Analog Devices – Triple-Channel Digital Isolators

ADuM1300/ADuM1301
Data Sheet
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS—5 V, 105°C OPERATION
All voltages are relative to their respective ground. 4.5 V ≤ VDD1 ≤ 5.5 V, 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply
over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V. These
specifications do not apply to ADuM1300W and ADuM1301W automotive grade versions.
Table 1.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel, Quiescent
Output Supply Current per Channel, Quiescent
ADuM1300 Total Supply Current, Three Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM1301 Total Supply Current, Three Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM130xARW
Minimum Pulse Width²
Maximum Data Rate³
Propagation Delay⁴
Pulse Width Distortion, |tPLH − tPHL|⁴
Change vs. Temperature
Propagation Delay Skew⁵
Channel-to-Channel Matching⁶
Symbol
IDDI (Q)
IDDO (Q)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (90)
IDD2 (90)
Min
Typ Max Unit
0.50 0.53 mA
0.19 0.24 mA
1.6 2.5 mA
0.7 1.0 mA
6.5 8.1 mA
1.9 2.5 mA
57 77 mA
16 18 mA
IDD1 (Q)
IDD2 (Q)
1.3 2.1 mA
1.0 1.4 mA
IDD1 (10)
IDD2 (10)
5.0 6.2 mA
3.4 4.2 mA
IDD1 (90)
IDD2 (90)
43 57 mA
29 37 mA
IIA, IIB, IIC, IE1, IE2 −10
+0.01 +10 μA
VIH, VEH
2.0
V
VIL, VEL
0.8 V
VOAH, VOBH, VOCH (VDD1 or VDD2) − 0.1 5.0
V
(VDD1 or VDD2) − 0.4 4.8
V
VOAL, VOBL, VOCL
0.0 0.1 V
0.04 0.1 V
0.2 0.4 V
PW
1
tPHL, tPLH
50
PWD
tPSK
tPSKCD/tPSKOD
1000 ns
Mbps
65 100 ns
40 ns
11
ps/°C
50 ns
50 ns
Test Conditions
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
5 MHz logic signal freq.
5 MHz logic signal freq.
45 MHz logic signal freq.
45 MHz logic signal freq.
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
5 MHz logic signal freq.
5 MHz logic signal freq.
45 MHz logic signal freq.
45 MHz logic signal freq.
0 V ≤ VIA, VIB, VIC ≤ VDD1 or VDD2,
0 V ≤ VE1, VE2 ≤ VDD1 or VDD2
IOx = −20 μA, VIx = VIxH
IOx = −4 mA, VIx = VIxH
IOx = 20 μA, VIx = VIxL
IOx = 400 μA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Rev. I | Page 4 of 32