UG-435 Datasheet, PDF (3/20 Pages) Analog Devices – Evaluation Board for the ADF4351 Fractional-N PLL Frequency Synthesizer

Evaluation Board User Guide
QUICK START GUIDE
Follow these steps to quickly evaluate the ADF4351 device:
1. Install the ADF435x software from the CD.
2. Connect the EVAL-ADF4351EB1Z to the PC and install
the necessary drivers.
3. Follow the hardware driver installation procedure.
4. Ensure that Switches SW1 and SW2 are closed.
5. Run the ADF435x software.
UG-435
6. Select the USB board connection and the ADF4351 device
in the Select Device and Connection tab of the software
front panel window.
7. Click the Main Controls tab. Update all registers.
8. Connect the spectrum analyzer to J2.
9. Measure the results.
Rev. 0 | Page 3 of 20