UG-435 Datasheet, PDF (1/20 Pages) Analog Devices – Evaluation Board for the ADF4351 Fractional-N PLL Frequency Synthesizer

Evaluation Board User Guide
UG-435
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
Evaluation Board for the ADF4351 Fractional-N PLL Frequency Synthesizer
FEATURES
Self-contained board including PLL, VCO, loop filter (35 kHz),
25 MHz TCXO reference, USB interface, and voltage
regulators
Accompanying software allows control of synthesizer
functions from a PC
Choice of power supply via USB or external feeding
Typical phase noise performance of −104 dBc/Hz @ 3 kHz
offset from carrier (1 GHz output frequency)
EVALUATION KIT CONTENTS
EVAL-ADF4351EB1Z board
USB Standard-A to Mini-B cable
CD that includes
Self-installing software that allows users to control the
board and exercise all functions of the device
Electronic version of the ADF4351 data sheet
Electronic version of the UG-435 user guide
ADDITIONAL EQUIPMENT
PC running Windows XP or more recent version
Spectrum analyzer
Oscilloscope (optional)
DOCUMENTS NEEDED
ADF4351 data sheet
REQUIRED SOFTWARE
Analog Devices ADF435xPLL software (Version 4 or higher)
ADIsimPLL™
GENERAL DESCRIPTION
This board is designed to allow the user to evaluate the perfor-
mance of the ADF4351 frequency synthesizer for phase-locked
loops (PLLs). Figure 1 shows the board, which contains the
ADF4351 integrated synthesizer and VCO, SMA connectors for
the output signal, power supplies, a reference oscillator, and an
USB connector. There is also a loop filter (35 kHz) on board.
The evaluation board is set up for a 25 MHz PFD comparison
frequency. An on-board TCXO provides the 25 MHz reference
frequency.
The package also contains Windows® software (XP or later) to
allow easy programming of the synthesizer.
EVALUATION BOARD
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Figure 1. EVAL-ADF4351EB1Z
Rev. 0 | Page 1 of 20