ADV7340_15 Datasheet, PDF (21/108 Pages) Analog Devices – Multiformat Video Encoder, Six 12-Bit Noise Shaped Video DACS

Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 13.
Parameter¹
VAA to AGND
VDD to DGND
PVDD to PGND
VDD_IO to GND_IO
AGND to DGND
AGND to PGND
AGND to GND_IO
DGND to PGND
DGND to GND_IO
PGND to GND_IO
Digital Input Voltage to GND_IO
Analog Outputs to AGND
Maximum CLKIN Input Frequency
Storage Temperature Range (TS)
Junction Temperature (TJ)
Lead Temperature (Soldering, 10 sec)
Rating
−0.3 V to +3.9 V
−0.3 V to +2.3 V
−0.3 V to +2.3 V
−0.3 V to +3.9 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to VDD_IO + 0.3 V
−0.3 V to VAA
80 MHz
−65°C to +150°C
150°C
260°C
1 _{Analog output short circuit to any power supply or common can be of an}
indefinite duration.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADV7340/ADV7341
The ADV7340/ADV7341 are high performance integrated
circuits with an ESD rating of <1 kV, and they are ESD sensitive.
Proper precautions should be taken for handling and assembly.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 14. Thermal Resistance¹
Package Type
θJA
θJC
Unit
64-Lead LQFP
47
11
°C/W
1 _{Values are based on a JEDEC 4-layer test board.}
The ADV7340/ADV7341 are RoHS-compliant, Pb-free products.
The lead finish is 100% pure Sn electroplate. The devices are
suitable for Pb-free applications up to 255°C (±5°C) IR reflow
(JEDEC STD-20).
Each part is backward compatible with conventional SnPb
soldering processes. The electroplated Sn coating can be soldered
with Sn/Pb solder paste at conventional reflow temperatures of
220°C to 235°C.
ESD CAUTION
Rev. C | Page 21 of 108