ADUM1200UR-EP Datasheet, PDF (17/28 Pages) Analog Devices – Dual-Channel Digital Isolators

Data Sheet
ADuM1200/ADuM1201
ELECTRICAL CHARACTERISTICS—MIXED 3 V/5 V, 125°C OPERATION
All voltages are relative to their respective ground; 3.0 V ≤ VDD1 ≤ 3.6 V, 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply
over the entire recommended operating range, unless otherwise noted; all typical specifications are at TA = 25°C; VDD1 = 3.0 V, VDD2 = 5.0 V;
this applies to ADuM1200W and ADuM1201W automotive grade products.
Table 7.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel,
Quiescent
Output Supply Current per Channel,
Quiescent
ADuM1200W, Total Supply Current,
Two Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (TRZ and URZ Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (URZ Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM1201W, Total Supply Current,
Two Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (TRZ and URZ Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (URZ Grade Only)
VDD1 Supply Current
VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM120xWSRZ
Minimum Pulse Width²
Maximum Data Rate³
Propagation Delay⁴
Pulse Width Distortion, |tPLH − tPHL|⁴
Propagation Delay Skew⁵
Channel-to-Channel Matching⁶
Output Rise/Fall Time (10% to 90%)
Symbol Min
IDDI (Q)
IDDO (Q)
Typ
Max
Unit Test Conditions
0.26
0.35
mA
0.19
0.25
mA
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (25)
IDD2 (25)
0.6
1.0
mA DC to 1 MHz logic signal freq.
0.5
0.8
mA DC to 1 MHz logic signal freq.
2.2
3.4
mA 5 MHz logic signal freq.
1.3
2.0
mA 5 MHz logic signal freq.
5.2
7.7
mA 12.5 MHz logic signal freq.
2.8
3.4
mA 12.5 MHz logic signal freq.
IDD1 (Q)
IDD2 (Q)
0.4
0.8
mA DC to 1 MHz logic signal freq.
0.8
1.1
mA DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
1.5
2.2
mA 5 MHz logic signal freq.
2.8
3.5
mA 5 MHz logic signal freq.
IDD1 (25)
IDD2 (25)
3.4
4.8
mA 12.5 MHz logic signal freq.
6.3
8.0
mA 12.5 MHz logic signal freq.
IIA, IIB
−10
+0.01
+10
μA
VIH
0.7 (VDD1 or VDD2)
V
VIL
0.3 (VDD1 or VDD2) V
VOAH, VOBH (VDD1 or VDD2) − 0.1 VDD1 or VDD2
V
(VDD1 or VDD2) − 0.5 (VDD1 or VDD2) − 0.2
V
VOAL, VOBL
0.0
0.1
V
0.04
0.1
V
0.2
0.4
V
0 V ≤ VIA, VIB ≤ (VDD1 or VDD2)
IOx = −20 μA, VIx = VIxH
IOx = −4 mA, VIx = VIxH
IOx = 20 μA, VIx = VIxL
IOx = 400 μA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
CL = 15 pF, CMOS signal levels
PW
1000
ns
1
Mbps
tPHL, tPLH
15
PWD
150
ns
40
ns
tPSK
tPSKCD/
tPSKOD
tR/tF
50
ns
50
ns
3
ns
Rev. I | Page 17 of 28