5962-89710013A Datasheet, PDF (17/20 Pages) Analog Devices – CMOS Latched 8-/16-Channel Analog Multiplexers

ADG526A/ADG527A
OUTLINE DIMENSIONS
0.005 (0.13)
MIN
28
0.100 (2.54)
MAX
15
0.610 (15.49)
0.500 (12.70)
1
14
PIN 1
0.225(5.72)
MAX
1.490 (37.85) MAX
0.015 (0.38)
MIN
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.026 (0.66)
0.014 (0.36)
15°
0.100
0.070 (1.78) SEATING
0°
(2.54)
BSC
0.030 (0.76) ^PLANE
0.620 (15.75)
0.590 (14.99)
0.018 (0.46)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 26. 28-Lead Ceramic Dual In-Line Package [CERDIP]
(Q-28)
Dimensions shown in inches and (millimeters)
1.565 (39.75)
1.380 (35.05)
28
0.250 (6.35)
MAX
0.200 (5.08)
0.115 (2.92)
1
0.100 (2.54)
BSC
0.022 (0.56)
0.014 (0.36)
0.070 (1.78)
0.050 (1.27)
15
0.580 (14.73)
0.485 (12.31)
14
0.015 (0.38)
GAUGE
0.015 ^PLANE
(0.38)
MIN
SEATING
PLANE
0.005 (0.13)
MIN
0.625 (15.88)
0.600 (15.24)
0.700 (17.78)
MAX
COMPLIANT TO JEDEC STANDARDS MS-011
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE LEADS.
Figure 27. 28-Lead Plastic Dual In-Line Package [PDIP]
(N-28)
Dimensions shown in inches and (millimeters)
0.195 (4.95)
0.125 (3.17)
0.015 (0.38)
0.008 (0.20)
Rev. C | Page 17 of 20