OP37GPZ Datasheet, PDF (15/16 Pages) Analog Devices – Low Noise, Precision, High Speed tional Amplifier

OP37
OUTLINE DIMENSIONS
8-Lead Ceramic DIP – Glass Hermetic Seal [CERDIP]
(Q-8)
Dimensions shown in inches and (millimeters)
0.005 (0.13) 0.055 (1.40)
MIN
MAX
8
PIN 1
1
5
0.310 (7.87)
0.220 (5.59)
4
0.100 (2.54) BSC
0.405 (10.29) MAX
0.200 (5.08)
MAX
0.060 (1.52)
0.015 (0.38)
0.320 (8.13)
0.290 (7.37)
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36)
0.150 (3.81)
MIN
0.070 (1.78)
SEATING
PLANE
0.030 (0.76)
15
0
0.015 (0.38)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Plastic Dual-in-Line Package [PDIP]
(N-8)
Dimensions shown in inches and (millimeters)
0.375 (9.53)
0.365 (9.27)
0.355 (9.02)
8
5 _{0.295 (7.49)}
0.285 (7.24)
1
4 0.275 (6.98)
0.100 (2.54)
BSC
0.180
(4.57)
MAX
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
0.015
(0.38)
MIN
SEATING
PLANE
0.060 (1.52)
0.050 (1.27)
0.045 (1.14)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MO-095AA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Standard Small Outline Package [SOIC]
Narrow Body
(RN-8)
Dimensions shown in millimeters and (inches)
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497) 1
5
6.20 (0.2440)
4 ^{5.80 (0.2284)}
0.25 (0.0098)
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.50 (0.0196)
0.25 (0.0099) ^{؋ 45؇}
0.10 (0.0040)
COPLANARITY
0.10
SEATING
PLANE
0.51 (0.0201)
0.33 (0.0130)
8؇
0.25 (0.0098) ^{0؇ 1.27 (0.0500)}
0.19 (0.0075) ^{0.41 (0.0160)}
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
REV. B
–15–