ADE5166_09 Datasheet, PDF (15/156 Pages) Analog Devices – Single-Phase Energy Measurement IC with 8052 MCU, RTC, and LCD Driver

ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 11.
Parameter
VDD to DGND
VBAT to DGND
VDCIN to DGND
Input LCD Voltage to AGND, LCDVA,
LCDVB, LCDVC¹
Analog Input Voltage to AGND, VP, VN,
IP/IPA, IPB, and IN
Digital Input Voltage to DGND
Digital Output Voltage to DGND
Operating Temperature Range (Industrial)
Storage Temperature Range
64-Lead LQFP, Power Dissipation
Lead Temperature (Soldering, 30 sec)
1 _{When used with external resistor divider.}
Rating
−0.3 V to +3.7 V
−0.3 V to +3.7 V
−0.3 V to VSWOUT + 0.3 V
−0.3 V to VSWOUT + 0.3 V
−2 V to +2 V
−0.3 V to VSWOUT + 0.3 V
−0.3 V to VSWOUT + 0.3 V
−40°C to +85°C
−65°C to +150°C
300°C
ADE5166/ADE5169/ADE5566/ADE5569
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case condition, that is, a device
soldered in a circuit board for surface-mount packages.
Table 12. Thermal Resistance
Package Type
θJA
64-Lead LQFP
60
θJC
Unit
20.5
°C/W
ESD CAUTION
Rev. B | Page 15 of 156